• Virtual Serial Port Driver Registration Code
• Virtual Serial Port Driver Xp
• Virtual Serial Port Driver 6.9 By Eltima Software

Download the latest drivers for your Virtual Serial Port (COM5) to keep your Computer up-to-date. Set up a virtual COM port driver in Windows using. Install a USB printer then add a virtual serial port in Windows for. File authorization failed for the request. Configuring the port driver.

The various USB interface modules made by Technological Arts are based on the popular FTDI chip FT232RL. Usually, Windows will recognize them when you plug them into a USB port on your computer. If it doesn't, you will need to download and install the appropriate driver from the FTDI website. Drivers are provided for various versions of Windows. Download and install the correct version for your computer’s configuration before proceeding.

Now connect a USB cable between a USB port on your PC and the USB interface module you are using. Windows should report a new device has been found and proceed to initialize it. To determine which virtual COMport it has been assigned to, right click the MyComputer icon on your Windows desktop, and select Properties from the popup menu.

Next, click on the Hardware tab, and click on the Device Manager button. Click OK, and if Windows warns you about a duplicate, ignore the warning and click Yes. Click OK and then OK to the port settings.

Virtual Serial Port Driver Registration Code

Then close the Device Manager window. If you want to confirm the port change has indeed been made, click on Device Manager again and check the listed Ports.

Now close the System Properties window. At this point, you are ready to use the virtual COM port in any application! Note that, if you unplug the USB device and plug it back in later, Windows will still remember the COM port assignment, so you won't need to go through this procedure again. However, there is a known Windows issue that affects most applications.

Virtual Serial Port Driver Xp

Virtual Serial Port Driver 6.9 By Eltima Software

The virtual COM port will be removed from the device manager when the USB cable is unplugged, even if an application has the virtual COM port open. The virtual COM port will not be accessible even after the virtual serial device is reconnected unless the virtual COM port is released by the application prior to the reconnection, which may require closing the application first. It is therefore recommended that the application be closed before the USB device is unplugged.